What is the best 3D printer for under $1,000?
Low-cost 3D printer manufacturers– mostly Chinese– have been driving prices down over the past two or three years, all while putting more and more effort into quality.
We’ve gone from complex, DIY 3D printer kits that required hours or days to be assembled, to more user-friendly, pre-assembled machines that you can almost use right out of the box.
New standards have arisen, too. Features that used to be considered rare are now pretty common on the top 3D printers under $1,000: filament detection, heated beds, touchscreens, closed frames, and more.
Without further ado, let’s move on to the next section to check out which FDM 3D printers pack in the best performance for under $1K!
The 10 best 3D printers under $1,000 in 2020
|3D printer||Rating*||Build volume||Price**||Buy|
|Qidi Tech X-Plus||4.9/5||270 x 200 x 200 mm||$899||Buy|
|Original Prusa i3 MK3S||4.6/5||250 x 210 x 200 mm||$999||-|
|Tiertime UP mini 2 ES||4.5/5||120 x 120 x 120 mm||$599||Buy|
|Dremel DigiLab 3D20||4.4/5||230 x 150 x 140 mm||$679||Buy|
|Creality CR-10 V2||4.4/5||300 x 300 x 400 mm||$519||Buy|
|FlashForge Creator Pro||4.3/5||227 x 148 x 150 mm||$699||Buy|
|Creality Ender 5 Plus||4.2/5||350 x 350 x 400 mm||$569||Buy|
|Sindoh 3DWOX DP200||4.2/5||210 x 200 x 195 mm||$839||Buy|
|FlashForge Dreamer||4.1/5||230 x 150 x 140 mm||$799||Buy|
|Creality CR-10 S5||3.5/5||500 x 500 x 500 mm||$719||Buy|
*Rating: the ratings displayed are indexed from trusted third-party sources.
**Price: prices are indicative and can evolve over time and based on the country (import duties, shipping costs etc.).
The Original Prusa i3 MK3S is one of the best 3D printers under $1,000.
Overview of the best budget 3D printers under $1,000
Indeed, Qidi Tech includes two interchangeable extruders with the printer. One for common types of filament such as PLA or ABS, and one that’s tougher and can reach higher temperatures for Nylon, Carbon-fiber filled, and even Polycarbonate.
The printer’s flexible, removable build plate is two-sided, too. All you need to do is flip it over to switch between easy materials and tougher materials. Additionally, there are two different spool holders, outside or inside the printer if you need a completely closed frame.
More information: Qidi Tech X-Plus
Prusa Research Original Prusa i3 MK3S
- Build volume: 250 x 210 x 210 mm
- Price: $999
The MK3S was released early 2019 and is the most up-to-date version of the Original Prusa i3. It’s equipped with numerous features, including a magnetic print bed with swappable sheets, a range of sensors (filament, shifted layers, skipped steps, temperature drifts, etc.), and high-quality components.
A multi-material upgrade is available to allow 3D printing with up to 5 different filaments at a time. It isn’t full-color 3D printing, but it can definitely spice prints up.
More information: Prusa Research Original Prusa i3 MK3S
Tiertime UP mini 2 ES
- Build volume: 120 x 120 x 120 mm
- Price: $599
Although its build volume is a bit small compared to current standards, it does provide a great performance, especially with ABS prints. Its frame is closed to maintain a warm interior environment and its air filter helps reduce the amount of particles released in the air.
Also, you can open it from the front or back doors, and there are two magnetic lids on top as well.
More information: Tiertime UP mini 2 ES full review
Dremel DigiLab 3D20
- Build volume: 230 x 150 x 140 mm
- Price: $679
The Dremel 3D20’s closed frame and non-heated print bed make it safe enough to use in the classroom. That also means that it’s only able to print PLA-based filaments.
Hence, although it’s an excellent 3D printer for beginners, it may not be versatile enough for more advanced users who will quickly outgrow it.
More information: Dremel DigiLab 3D20
Those features include a filament sensor, a pause and resume function that works in case of a power failure, and optional automatic bed leveling that you can order separately and install yourself.
The printer also boasts dual cooling fans and a quiet, modern mainboard and power supply.
More information: Creality CR-10 V2
Aside from its dual extruder, the FlashForge Creator Pro is pretty basic with a heated print bed and a regular LCD screen. The relative lack of features– which is mainly due to the fact that the printer was released in 2016– doesn’t stop it from providing a reliable performance.
It’s easy to use, comes fully assembled, and FlashForge provides great customer service.
More information: FlashForge Creator Pro full review
This particular Creality 3D printer offers a super-sized build volume, so you can print huge objects or various smaller models in one go. It comes as a semi-kit which means you’ll have a few assembly steps to follow before being able to use it.
The Ender 5 Plus boasts auto-leveling, filament detection, and a large touchscreen.
More information: Creality Ender 5 Plus
Sindoh 3DWOX DP200
- Build volume: 210 x 200 x 195 mm
- Price: $839
This printer is designed to be as user-friendly as possible, all the way up to filament loading. Instead of manually feeding the filament into the extruder, you just have to slide in a cartridge.
While this is very practical, you’ll have to keep in mind that it means you’re tied to using only Sindoh’s materials.
More information: Sindoh 3DWOX DP200
FlashForge’s printer offers Wi-Fi connectivity, a heated build plate (120°C) and, more importantly, a dual extruder. This explains the price gap between both models.
The FlashForge Dreamer is compatible with PLA filaments and ABS filaments.
More information: FlashForge Dreamer
This 3D printer does have other cards up its sleeve, like a heated and removable bed, an auto-resume feature, and a filament detector.
It comes as a semi-kit to be assembled in a few quick steps.
More information: Creality CR-10 S5
Buying guide for 3D printers under $1,000
These are some of the things you should take into account when deciding on which 3D printer to buy.
Your printer’s maximum build size will, obviously, determine how big your prints can be. Keep in mind that the bigger your prints are, the longer they’ll take. Even small prints can require a few hours, so for a big 3D model you may be looking at a few days worth of printing.
For an idea of what can be printed, take a look at some of these sites where you can download STL files for free. Note that if you build volume is too small, it’s possible to “cut” models into separate 3D printable files and glue them together after.
Layer thickness and speed
Almost all 3D printers under $1,000 boast similar specs. Minimum layer thicknesses are typically around 0.1mm, or 0.05mm for some. The thinner your layers, the better your prints will look, and the longer they’ll take to print, too.
Users tend to print thicker layers anyways to get their prints done more quickly, as the difference isn’t too noticeable. In slicing software, you can see various layer profiles; “draft quality” is around 0.2mm, for example.
Maximum print speeds are also quite similar from one printer to another in the sub-1000 price range. They’re generally between 120 mm/s and 180 mm/s, but at those speeds you’re losing precision and print quality.
Recommended speeds for most prints are around 60 mm/s, or slower for highly-detailed prints. If you want small, detailed prints with excellent surface quality, you should look into resin 3D printers. There are cheap options, too, with some resin 3D printers under $1,000.
PLA is the most common kind of plastic you’ll find to 3D print. There’s an incredibly wide range of colors and types available, from glittery rainbow gradients to glow-in-the dark filaments. This material is also the cheapest, and doesn’t require a heated bed (even if it does help for first layer adhesion).
If you want to go beyond PLA filament, for example if you want to print flexible TPU or strong ABS, you’ll need a heated print bed. Ideally it’s also best to have a closed frame for these materials, to protect your prints from room drafts. You can still go for an open printer though and make a frame yourself. Even cardboard can do the trick!
For abrasive materials like Carbon-fiber-filled Nylon, your nozzle must be reinforced. A brass nozzle can be damaged with just one abrasive print. It’s possible to order new, suitable nozzles online if your printer doesn’t come with one.
3D printing still has a long way to go before it’s truly plug-n-play, even with professional or industrial 3D printers.
However, there have been many advances in the past years. Here are a few key features that can make printers more user-friendly:
- Automatic bed leveling: it’s recommended to level your print bed before each print. Some printers have sensors that allow them to level the bed automatically, so all you need to do is press a button. Otherwise, you have to do this manually, and it can take a while depending on how off it is.
- Assisted bed leveling: with this feature, the touchscreen interface lets you choose different points of the print bed (e.g. corners, center of the build plate). The print head moves automatically where you tell it to, instead of you having to move it by hand. You still have to tighten or loosen the print bed screws manually.
- Dual extruder: this functionality is relatively rare in this price range. It allows you to 3D print with two different materials at the same time.
- Filament sensor or filament run out detection: many printers have this feature. With a filament sensor, the print head can detect if there’s a jam, breakage, or if you ran out of filament. If that’s the case, the printer pauses immediately.
- Print resume: enables you to pause and resume your prints. Often, it works automatically in case of an unexpected power cut. If your print has been going on for several hours and you get a power failure, you’ll really appreciate being able to easily pick up where you left off.
- Swappable build plates: this makes it easier for you to remove your prints, and to do so without un-leveling your print bed (sometimes tugging on your part can throw off your bed level).
Some printers come fully assembled, or only require you to plug in the print head, for example. However, the majority of affordable 3D printers comme as kits that you need to assemble yourself.
Kits used to be complex and time-consuming to assemble for beginners (shoutout to the Anet A8 kit), but today they mainly come as semi-assembled kits. That means that most of the complicated parts are already assembled and you only have to put together the frame. This shouldn’t take more than an hour of your time.
What’s the best 3D printer kit under $1,000?
One of the best 3D printer kits under $1,000 is the Creality CR-10 V2.
Best large 3D printer under $1,000?
The best large 3D printer under $1,000 is the Creality CR-10 S5 which offers an impressive build volume of 500 x 500 x 500 mm.
What are the best SLA 3D printers under $1,000?
Most entry-level resin 3D printers use DLP or LCD technology. Some popular and cheap resin 3D printer brands include Elegoo, Longer3D, Phrozen, and ANYCUBIC.
More 3D printing resources
- Do you want to compare all existing 3D printers? Check out our comprehensive 3D printer comparison engine.
- If you want to buy a printer on Amazon, see our list of the best 3D printers on Amazon.
- Did you know your smartphone can become a 3D scanner with a free 3D scanning app?
- For tight budgets, we made a selection of the best FDM 3D printers under $300.