- an object
- an environment (such as a room)
- a person (3D body scanning)
Some 3D scanners can simultaneously collect shape and color data. A 3D scanned color surface is called a texture.
3D scans are compatible with Computer Aided Design (CAD) software and also 3D printing, after a little preparation on the computer software. A 3D scan can give a lot of information about the design of an object, in a process called reverse engineering.
- Laser triangulation 3D scanning technology, as illustrated on the image, projects a laser beam on a surface and measures the deformation of the laser ray.
- Structured light 3D scanning technology measures the deformation of a light pattern on a surface to 3D scan the shape of the surface.
- Photogrammetry, also called 3D scan from photographies, reconstructs in 3D a subject from 2D captures with computer vision and computational geometry algorithms.
- Contact-based 3D scanning technology relies on the sampling of several points on a surface, measured by the deformation of a probe.
A 3D scanner in action (source: Artec).
- Laser pulse (also called time of flight) 3D scanning technology is based on the time of flight of a laser beam. The laser beam is projected on a surface and collected on a sensor. The time of travel of the laser between its emission and reception gives the surface’s geometrical information.
3D scanning technologies
Laser triangulation 3D scanning technology
Laser triangulation-based 3D scanners use either a laser line or a single laser point to scan across an object. The laser is first cast by the 3D scanner. As the laser light reflects off the 3D scanned object, its initial trajectory is modified and picked up by a sensor. From the modification of the laser trajectory and trigonometric triangulation, the system can discern a specific deviation angle. The calculated angle is directly linked to the distance from the object to the scanner. When the 3D scanner collects enough distances, it is capable of mapping the surface’s object and of creating a 3D scan.
The main advantages 0f the laser triangulation technology for 3D scanning are its resolution and accuracy.
One downside of the laser triangulation technology is its sensibility to the properties of the surface to 3D scan. Very shiny or transparent surfaces are particularly problematic.
Structured light 3D scanning technology
Structured light 3D scanners use trigonometric triangulation but do not rely on a laser. Instead, the structured light 3D scanning technology works with the projection of a series of linear patterns onto an object. The system is then capable to examine the edges of each line in the pattern and to calculate the distance from the scanner to the object’s surface. The structured light used for 3D scanning can be white or blue and generated by numerous types of projectors, such as Digital Light Processing (DLP) technology. The projected pattern is usually a series of light rays but can also be a randomized dot matrix.
The main advantages of the structured light technology for 3D scanning are its speed, resolution and ability to 3D scan people.
One downside of the structured light technology is its sensibility to lighting conditions and issues to work outside.
Photogrammetry 3D scanning technology (photography)
Photogrammetry is the science of making measurements from photographs, especially for recovering the exact positions of surface points. Photogrammetry is based on a mix of computer vision and powerful computational geometry algorithms. The principle of photogrammetry is to analyze several photographs of a static subject, taken from different viewpoints, and to automatically detect pixels corresponding to a same physical point. The data input required from the user are the parameters of the camera such as focal length and lens distortion.
Contact-based 3D scanning technology
Contact-based 3D scanning is also known as digitizing. The contact technology for 3D scanning implies a contact based form of 3D data collection. Contact 3D scanners probe the subject through physical touch, while the object is firmly held in place. A touching probe is moved on the surface to various points of the object to record 3D information. The probe is sometimes attached to an articulated arm capable of collecting all its respective configurations and angles for more precision. Some specific configurations of contact-based 3D scanners are called Coordinated Measuring Machines (CMM).
Laser pulse-based 3D scanning technology
The Laser pulse-based 3D scanners, also known as Time-of-Flight scanners or Lidar, measure how long a casted laser takes to hit an object and come back. Because the speed of light is exactly known, the time it takes for the laser to do the way back gives the exact distance between the 3D scanner and the object. In order to precisely measure the distance, the 3D scanner computes millions of laser pulses with picosecond (0.000000001 seconds!) accuracy.